Yamaha RX-V1200 Owner's Manual page 7

(]i) STEREO/EFFECT
Switches the normal stereo or DSP effect reproduction.
When STEREO is selected, 2-channel input signals are
directed to the main left and right speakers without effect
sounds. All Dolby Digital and DTS audio signals except
for the LFE channel are mixed down to the main left and
right speakers.
_) AIBICIDIE
Selects one of the 5 preset station groups (A to E).
_) PROGRAM <1 / _>
Selects the DSP program (see page 28).
(_ PRESET/TUNING <1 / _>
Selects preset station number l to 8 when the colon (:)
appears next to the band indication on the front panel
display, and selects the tuning frequency when the colon
(:) does not appear.
_) PHONES jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the OUTPUT jacks or to the speakers.
_) VIDEO AUX jacks
Inputs audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
PRESET/TUNING EDIT
Switches the function of PRESET/TUNING <:1 / 12> (the
colon (:) turns on or oil) between selecting a preset
station number and tuning.
This button is also used to exchange the assignment of
two preset stations with each other.
_) FM/AM
Switches the reception band between FM and AM.
_) MEMORY (MAN'L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
_ei|,lliN_.'f_J,wl=Envo*lr,;,_
_) TUNING MODE (AUTO/MAN'L MONO)
Switches the tuning mode between automatic and manual.
To select the automatic tuning mode, press this button so
that the "AUTO" indicator lights up on the front panel
display. To select the manual tuning mode, press this
button so that the "AUTO" indicator does not light up.
_) BASS
Adjusts the low-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the low-frequency response.
_1 TREBLE
Adjusts the high-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the high-frequency response.
• If you increase or decrease the high-frequency
or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the left and
right main speakers.
• Opening and closing the front
panel door
When you are not operating the controls behind the front
panel door, close the door.
To open, press gently on the lower part of the panel.
5