Yamaha RX-V1200 Owner's Manual page 39

There are 2 ways of tuning; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
When using the remote control to proceed some of the
steps in "TUNING", make sure the "TUNER" mode is
selected.
432 3
• Automatic tuning
[] Press INPUT <1 / 1> (TUNER on the remote
control) to select TUNER as the input source.
<_ ENPUT [_>
Front panel
or
_ER ST_N_Y S_EEP 6_tNP_
rn 0
[] PHONe TUNER CO
v Au× CBWSAT
o o
_6m (_ Q_ 6VCR _ _R2/OVR
Remote control
[] Press FM/AM to select the reception band.
"FM" or "AM" appears on the front panel display.
FM/AM
I II IIII
[] Press TUNING MODE (AUTO/MAN'L MONO)
so that the "AUTO" indicator lights up on the
front panel display.
TUNING
MODE
AUTO
_ Lights up
AU 0
If the colon (:) appears on the front panel display
next to the band indication, press PRESET/TUNING
EDIT to turn it off.
PRESET
_RI ceusaT o-rww ovu _/r_E CO-R TUNER CU
/TUNING
......... ,-, a
m l ! - H q, t H i _ ' "i 4.
[]
IqilliO
Press PRESET/TUNING <1 / 1> once to begin
automatic tuning.
Press 12>to tune in to a higher frequency, or press <:1
to tune in to a lower frequency. Press the same button
again if the tuning search does not stop at the desired
station.
PRESET/
_RI CBU_T O-,_/W OVO _/r_E CO-R _ CU
<a TUNING [>
,_ i:::i ,...,,¢"_i i' ...'i 4 . i7i 4.
When tuned in to a station, the "TUNED" indicator
lights up and the frequency of the received station is
shown on the front panel display.
_.,$,._
• Use the manual tuning method if the tuning search does not
stop at the desired station because the signal is weak.
• Manual tuning
If the signal from the station you want to select is weak,
you must tune in to it manually.
[] SelectTUNER and the
reception
band
following steps 1 and 2 described in
"Automatic tuning" on left.
[] Press TUNING MODE (AUTO/MAN'L MONO)
so that the "AUTO" indicator goes off from
the front panel display.
TUNING
MODE
AUTO
Au o Goes off
If the colon (:) appears on the front panel display
next to the band indication, press PRESET/TUNING
EDIT to turn it off.
PRESET _RI CBT O-_/W OrB N_#E CD-R TUNER CD
/TUNING
[]
Press PRESET/TUNING <1 / _> to tune in to
the desired station manually. PRESET/
Hold down the button to _ TUN,NG _
continue the tuning search.
• Manually tuning in to an FM station will automatically change
the reception mode to monaural to increase the signal quality.
37