Yamaha RX-V1200 Owner's Manual page 36

• For moive programs: No. 8 to 10
According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field
pattern.
Table of Program Names for Each Input Format
nput 2 channel 5.1 channel 6.1 channel .1
Stereo DOLBY DIGITAL DTS DOLBY DIGITAL DTS ES
No. Program
8 MOVIE 70 mm Spectacle DGTL Spectacle DTS Spectacle Spectacle 6.1 Spectacle ES
THEATER 1
70 mm Sci-Fi DGTL Sci-Fi DTS Sci-Fi Sci-Fi 6.1 Sci-Fi ES
9 MOVIE 70 mm Adventure DGTL Adventure DTS Adventure Adventure 6.1 Adventure ES
THEATER 2
70 mm General DGTL General DTS General General 6.1 General ES
10 DOLBY --
Normal -- Matrix 6.1 --
DIGITAL
-- Enhanced -- Enhanced 6. l --
DTS DIGITAL -- -- Normal -- ES Matrix 6.1
SUR ES Discrete 6.1 ,2
-- -- Enhanced -- Enhanced ES
PRO LOGIC Normal ....
Enhanced ....
PRO LOGIC
Movie ....
1I
Music ....
DTS Neo: 6 Cinema ....
Music ....
*1 means the 6.1/ES decoder is ON.
*2 means the DTS ES software encoded with Discrete 6.1 is input.
\It
..-@-_
o If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically
switched to the Dolby Digital playback sound field or DTS playback sound field.
o If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6. I/ES button on the
remote control, the Dolby Digital Matrix 6.1 or DTS ES decoder will automatically turn on and the corresponding DSP program will
be selected.
o 6.1/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the
program name changes to the corresponding name for 6.1 channel.
o When playing 6.1 channel source with 6.1/ES on the remote control off, the program name changes to the corresponding name for
5.1 channel.
• The" _ " indicator does not light up when selecting the program No. 10 except for the Enhanced mode.
34