Integrated Peripherals - Foxconn K8S755A series Manual

Integrated Peripherals

SIS OnChip IDE Device
Press <Enter> to set onchip IDE device. Please refer to page 45.
SIS OnChip PCI Device
Press <Enter> to set onchip PCI device. Please refer to page 46.
Onboard SuperIO Device
Press <Enter> to set onchip onboard SuperIO device. Please refer to page
47.
IDE HDD Block Mode (Default:Enabled)
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
Init Display First (Default:PCI Slot)
This option is used to set which display device will be used first when your
PC starts up. The available setting values are: PCI Slot and AGP.
USB0/1/2/2.0 Access Interface (Default:EDB Bus)
This option is used to set USB0/1/2/2.0 Access Interface. The available
setting values are: PCI Bus and EDB Bus.
Audio Access Interface (Default:EDB Bus)
This option is used to set audio access Interface. The available setting
values are: PCI Bus and EDB Bus.
44
Integrated Peripherals Menu
44
Chapter 3 BIOS Description
2004-9-22, 17:20