Foxconn K8S755A series Manual page 33

Audio Interface: F_AUDIO
The audio port includes two parts – the Front Audio and Rear Audio. Their priority
is sequenced from high to low (Front Audio to Rear Audio). If headphones are
plugged into the front panel of the chassis (using the Front Audio), then the Line
Out (Rear Audio) on the rear panel will not work. If you do not want to use the
Front Audio, pin 5 and 6, pin 9 and 10 must be short, and then the signal will be
sent to the rear audio port.
SPDIF Out Connector: SPDIF_OUT
The SPDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
25
Chapter 2 Installation Instructions
1
MIC
MIC_PWR
AUD_OUT_R
NA
AUD_OUT_L
9
F_AUDIO
1
SPDIF_OUT
2004-9-22, 17:16
2
MIC_GND
+5VAC
AUT_RET_R
EMPTY
AUT_RET_L
10
GND
SPDIF-OUT
EMPTY
5V-SYS
25