Foxconn K8S755A series Manual page 37

Clear CMOS Jumper: CLS_CMOS
This motherboard uses the CMOS RAM to store all the set parameters. The
CMOS can be cleared by removing the CMOS jumper. How to clear CMOS?
1. Turn off the AC power supply and short pins 1 and 2 on the jumper.
2. Return the jumper to the normal setting (locking pins 2 and 3 together with the
jumper cap).
3. Turn on the system. The BIOS is returned to the default settings.
Warning:
1. Disconnect the power cable before adjusting the jumper
settings.
2. DO NOT clear the CMOS while the system is turned on.
29
Chapter 2 Installation Instructions
Normal
(default)
Clear
Clear CMOS Jumper
2004-9-22, 17:16
29