Foxconn K8S755A series Manual page 13

1 ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
2
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP8X mode
graphics cards for 3D graphical applications.
3 CPU socket
A 754-pin surface mount, Zero Insertion Force (ZIF) Socket for the AMD
Athlon64 Processor, Support HyperThansport
up to 1600MT/s bandwidth.
4 North Bridge controller
The SiS 755 integrates a high performance host interface for the AMD
Athlon64 Processor, and SiS MuTIOL technology.
DDR DIMM sockets
5
These three 184-pin DIMM sockets support up to 3GB system memory
using unbuffered non-ECC PC3200/2700/2100 DDR DIMMS.
6
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
7
The ITE8705F controller Super I/O provides support that includes floppy,
serial ports, and parallel port to rest of platform through the SiS 755 and SiS
964 via the Low Pin Count (LPC) interface.
8
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy
disk drive. One side of the connector is slotted to prevent incorrect insertion
of the floppy disk cable.
5
Chapter 1 Product Introduction
K8S755A Series User Manual
TM
Technology with 8/16 links,
2004-9-22, 17:16
®
®
5