Foxconn K8S755A series Manual page 27

Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicator.
Hard Disk LED Connector (HD-LED)
Attach the connector to the HD-LED on the front panel of the case; the LED will
flash while the HDD is in operation.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
19
Chapter 2 Installation Instructions
SIDE
1
PIDE
IDE-LED
GND
RESET
NC
FP
2004-9-22, 17:16
1 2
PWR-LED
PWRBTN#
GND
9 10
FP1!
19