Foxconn K8S755A series Manual page 49

Security Option (Default: Setup)
When it is set to Setup, a password is required to enter the CMOS Setup screen;
when it is set to System, a password is required not only to enter CMOS Setup,
but also to start up your PC.
APIC Mode (Default: Enabled)
This option is used to enable or disable APIC mode. The available setting
values are: Disabled and Enabled.
MPS Version Control For OS (Default: 1.4)
This option is used to set up the version of MPS Table used in NT4.0 OS.
OS Select For DRAM > 64MB (Default: Non-OS2)
This option is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this option
at the default.
HDD S.M.A.R.T. Capability (Default: Disabled)
This option is used to enable or disable hard disk's S.M.A.R.T. (Self-Monitoring,
Analysis, and Reporting Technology) support function. The available setting
values are: Disabled and Enabled.
Report No FDD For WIN 95 (Default: Yes)
If you are using the Windows 95 and running a system with no floppy drive,
select Yes for this option to ensure compatibility with Windows 95 logo
certification. Otherwise, select No.
Video BIOS Shadow (Default: Enabled)
This option is used to enable or disable Video BIOS Shadow. If you enable
this option, the video BIOS will be copied to RAM. Video shadow will increase
the video speed. The available setting values are: Disabled and Enabled.
Full Screen LOGO Show (Default: Enabled)
This option allows you to enable or disable the full screen logo. The available
setting values are: Disabled and Enabled.
Small Logo (EPA) Show (Default: Disabled)
This option allows you to enable or disable the EPA logo. The available setting
values are: Disabled and Enabled.
41
Chapter 3 BIOS Description
2004-9-22, 17:20
41