Chapter 2 Getting Started; Attaching The Wrist Strap - Fluke Ti30 User Manual

Chapter 2 Getting Started

Your Ti30 imager has settings and capabilities that let you customize its operation
for the task at hand. The following section describes each setting on the imager.

Attaching the Wrist Strap

Your Ti30 imager comes with a wrist strap, which can be attached by clipping the
metal part of the strap to the small metal bar at the base of the imager (see Figure 5
below).
Figure 5. Attaching the Wrist Strap
Jan 31st, 2005
Attach wrist strap
- 14 -