Table of Contents
Advertisement
Centigrade/Fahrenheit Toggle Button
Centigrade/Fahrenheit button toggles the displayed temperature data in either
Centigrade or Fahrenheit temperature scales. The factory default is Centigrade.
LCD Backlight Illumination Switch
LCD Backlight Illumination switch provides three backlight illumination levels as
shown below.
Off
Full brightness is recommended for indoor use; use Medium brightness to save battery life,
and set backlight Off for outdoor applications. The default position is Full brightness.
Palette Switch
The
Palette switch allows the Ti30 imager to display temperature patterns in three
different palettes as indicated below:
•
Rainbow
•
Ironbow
•
Grayscale
See Selecting the Color Palette on page 58 for more information. The default position is
Rainbow.
Measurement Mode Switch
The
Measurement mode switch permits the user to change the way thermal
information is presented on the display. Depending on the mode you choose, you will have
all temperature points shown on the thermal image, or you may have just a narrow interval
of temperature points being displayed at a time. The decision of which mode to use depends
on each operator's needs and limitations.
Jan 31st, 2005
Medium
- 22 -
Full
Hide quick links:
Advertisement
Table of Contents
