Getting Started Quickly - Fluke 27/FM Operator's Manual

Getting started Quickly
Figure 2. Battery Installation and Replacement
GETTING STARTED QUICKLY
NOTE
Read "MULTIMETER SAFETY" (above) before using the DMM.
Familiarize yourself with the layout of the meter, taking note of the
location of the input terminals, rotary switch, push buttons and display.
After doing so, you probably already have a good idea how to use the meter
to take basic voltage, current, and resistance measurements. Simply:
1. Insert the test leads in the appropriate input terminals, and set
the rotary switch to the desired position.
2.
To select additional functions and modes, press the appropriate
pushbuttons above the rotary switch.
o To operate the MIN/MAX and [manual] RANGE features: press to
select, press again to increment, and press and hold for two
seconds to exit.
o To operate the [Touch] HOLD and REL[ative] features: press to
activate and press again to exit.
An annunciator lights on the display to indicate that a function
has been selected.