First, The Batteries - Fluke Ti30 User Manual

First, the Batteries

The battery compartment is located in the handle of the unit.
The unit is shipped with an empty battery pack for non-rechargeable batteries installed in the
battery compartment.
Remove the empty battery pack from the battery compartment.
The battery pack can be removed by sliding the lock tab towards the trigger.
Once the lock is released, the battery pack will slide down. Tilt the top of the unit up to slide
the battery pack out.
Figure 1. Removing the Battery Pack
Jan 31st, 2005
Battery Lock Tab
Move the lock tab in this direction
Battery pack slides out
(AA batteries not included)
- 10 -