The imager's internal clock can only be set or changed from the computer. You cannot set
or adjust it on the imager. It is very important to have the internal clock set to your local
time / date, since your inspections will be tracked based on time / date information.
To set the time:
1. Press the "Set Date and Time in Imager" button on the lower portion of the Main
menu.
The following window appears:
2. Select the box for matching your imagers date and time to that of your computer.
3. Or click the Date arrow to see the calendar
The following window appears:
Jan 31st, 2005
- 53 -