5320A
Users Manual
Description of Abbreviations
Abbreviation
<DNPD>
<CPD>
?
(?)
<cr>
<lf>
SCPI Command Summary
Tables 5-4 through 5-7 summarize the SCPI commands implemented in the
Calibrator.
OUTPut[:STATe]?
OUTPut[:STATe]{ON|OFF}
5-8
Table 5-3. Abbreviation Descriptions
Decimal Numeric Program Data. This format is used to express decimal number
with or without the exponent.
Character Program Data. Usually it represents a group of alternative character
parameters. E.g. {ON | OFF | 0 | 1}.
A flag indicating a request for the value of the parameter specified by the
command. No parameter other than the question mark can be used.
A flag indicating a request for the parameter specified by the command. This
command permits a value to be set as well as used a request.
Carriage return. ASCII code 13. This code executes the program line.
Line feed. ASCII code 10. This code executes the program line.
Table 5-4. OUTPut Command Summary
Command
Description
Description
Returns the state of the output terminals.
Activates or deactivates output terminals .