Table of Contents
Advertisement
5320A
Users Manual
[:LEVel] <DNPD>
[:LEVel]?
:LOW {GROund|FLOat}
:LOW?
:SENSe {ON|OFF}
:SENSe?
:CURR?
[:CURR]:LIMit?
:IDPassive
[:CURRent]:NOMinal <DNPD>
[:CURRent]:NOMinal?
[:CURRent]:INSTant?
[:CURRent]:RESulting?
:IDDifferential
[:CURRent]:NOMinal <DNPD>
[:CURRent]:NOMinal?
[:CURRent]:INTstant?
[:CURRent]:RESulting?
:RCDT
:TIME <DNPD>
:TIME?
:CURRent?
:RPOSition <DNPD>
:RPOSition?
[:CURRent]:NOMinal <DNPD>
[:CURRent]:NOMinal?
[:CURRent]:MULTiplier <CPD>
[:CURRent]:LEVel <CPD>
5-12
Table 5-4. SOURce Command Summary (cont.)
Command
Description
Sets the Low Resistance value.
Returns the set value for the Low Resistance mode.
Connects or disconnect the Low terminal to ground.
Returns status of the Low Terminal grounding.
Selects between 4-wire and 2-wire resitance mode.
Returns ON when 4-wire is selected and OFF when 2-wire
is selected.
Returns the current flowing through the selected
resistance.
Returns the maximum current allowed to flow through the
resistance.
Sets Calibrator to Passive Leakage Current Mode.
Sets the Passive Leakage Current value.
Returns the nominal Passive Leakage Current Value.
Returns instantaneous current flowing through the
Calibrator.
Returns resulting measured UUT current.
Sets Calibrator to Differential Leakage Current Mode.
Set the Differential Leakage Current value.
Returns the nominal Differential Leakage Current value.
Returns instantaneous current flowing through the
Calibrator.
Returns resulting measured UUT current.
Path to RCD Trip Time mode.
Set the trip time for the RCD Trip Time mode.
Returns the set trip time for the RCD Trip Time mode.
Returns the measured trip current.
Selects one of the 16 resistances available in the RCD
Time function.
Returns the index value of the selected resistance.
Sets the nominal trip current value for the RCD Trip Time
Mode.
Returns the nominal trip current value.
Sets the trip current multiplier.
Sets the I level value.
Advertisement
Table of Contents
