This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
of the items shown here may not match those of your model.
A. Oven display
B. Timed cooking
C. Number pads
D. Control lock
F. Time of day, timer display
H. Upper or lower oven selectors
(double oven models only)
I. Oven option selectors
J. Convect conversion
K. Convect full meal
L. Oven light
N. Upper and lower oven Off/Cancel
(double oven models) Cancel Off
(single oven models)
When power is first supplied to the appliance, everything on the
displays will light up for 5 seconds. Then, "PF" will appear on the
oven display and a time of day will appear on the Time of Day
display. Press OFF/CANCEL to clear the oven display.
If "PF" appears at any other time, a power failure has occurred.
Press OFF/CANCEL and reset the clock if needed.
When the oven(s) are in use, this display shows the oven
heat source(s) and start time. On double oven
models, this display will also show which oven is being set. The
left cavity symbol in the oven display represents the upper oven,
and the right cavity symbol in the oven display represents the
In addition, during Timed Cooking, this display shows a vertical
bar and time countdown
and the stop time (if entered).
If "Err" appears on the oven display, an invalid pad was pressed.
Press OFF/CANCEL and retry your entry.
When the ovens are not in use, this display is blank.
Time of Day, Timer Display
This display shows the time of day or Timer countdown.
The START pad begins all oven functions except the Timer,
Control Lock and Sabbath Mode. If not pressed within 5 seconds
after pressing a pad, "START?" will appear on the oven display as
a reminder. Depending on your model, if not pressed within
4 or 5 minutes after pressing a pad, the oven display will return to
inactive mode (blank) and the programmed
function will be
The OFF/CANCEL pads stop their respective oven functions
except for the Clock, Timer, Control Lock and Sabbath Mode.
The cooling fan may continue to operate even after an oven
function has been canceled, depending on the oven temperature.
This is a 12-hour clock and does not show a.m. or p.m.
Before setting, make sure the oven(s), Timer and Timed Cooking
are off. On some models, the clock can be set when the oven(s)
are on, however the start time will disappear.
1. Press CLOCK SET/START.
2. Press the number pads to set the time of day.
3. Press CLOCK SET/START.
Time of Day from Display: Press and hold
CLOCK SET/START for 5 seconds. Repeat to redisplay. The time
should not have to be reset.