Extreme Networks IP Service Manager User Manual page 52

Service Activation
super-VLANs in general, and VLAN aggregation, see the ExtremeWare Software User
Guide.
Summary Steps. To add an IP range subscriber:
1 Launch the Create IP Range Subscriber wizard
2 Enter the subscriber name
3 Enter the VLAN tag
4 Select the IP aggregation point
5 Enter the IP range start and range end
6 Select a service bundle
7 Choose a device, module, and physical interface
8 Choose a loopback module, port, and VLAN ID
9 Select Finish to close the wizard
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To add an IP range subscriber
1 Launch the Create IP Range Subscriber wizard
To launch the Create IP Range Subscriber wizard, select Edit>Add>IP Subscriber
from the menu, or right-click a customer entry in the Customers panel and select
Add>IP Subscriber from the pop-up menu. The Create IP Range Subscriber wizard
will appear (see Figure 5-6).
5-10 IP Service Manager User Guide