Extreme Networks IP Service Manager User Manual page 50

Service Activation
4 Choose a service bundle
5 Choose a device, module, and physical interface
6 Choose a loopback module, port, and VLAN ID
7 Select Finish to close the wizard
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To add an IP subscriber:
1 Launch the Create IP Subscriber wizard
To launch the Create IP Subscriber wizard, select Edit>Add>IP Subscriber from the
menu, or right-click a customer entry in the Customers panel and select Add>IP
Subscriber from the pop-up menu. The Create IP Subscriber wizard will appear
(see Figure 5-5).
Figure 5-5: Create IP Subscriber Wizard
2 Enter the subscriber name
5-8 IP Service Manager User Guide