Add An Ip Subscriber - Extreme Networks IP Service Manager User Manual

Service Activation Tasks
Figure 5-4: Create IP Subscriber W)izard
5 Select Finish
Select Finish to close the Create Customer wizard.

Add an IP Subscriber

When you create an IP subscriber, you are defining a single port VLAN on a device,
and that single port will be providing network services to any devices connected
through that port. You will essentially be creating a VLAN/ IP subnet to deliver service.
For more information about how the IP subscriber parameters affect the operation of
the created VLAN on the device, see the ExtremeWare Software User Guide.
Summary Steps. To add an IP subscriber:
1 Launch the Create IP Subscriber wizard
2 Enter the subscriber name
3 Enter the IP address and subnet mask
IP Service Manager User Guide 5-7