Extreme Networks IP Service Manager User Manual page 42

Service Library
If you choose Single Port, choose the Source Port from the drop-down list. Your
Source Port choices are any, user defined, or a list of well known services like
telnet, finger or tftp. If you choose user defined, you will also choose the Source
Port Number, otherwise the port number will be filled in for the well known
services, or left blank for any port (see Figure 4-6).
Figure 4-6: Specifying a Single Port in a Traffic Policy
If you choose Range Of Ports, the wizard will change so you can specify the Start
Source Port Number and the End Source Port Number (see Figure 4-7).
Figure 4-7: Specifying a Range of Ports in a Traffic Policy
6 Select Finish
Select Finish to close the wizard.
4-12 IP Service Manager User Guide