Extreme Networks IP Service Manager User Manual page 40

Service Library
1 Launch the Create Traffic Policy wizard
2 Enter the policy name
3 Enter the source and destination subnets
4 Enter the policy precedence
5 For TCP and UDP, enter the source and destination ports
6 Select Finish
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To add a traffic policy:
1 Launch the Create Traffic Policy wizard
To launch the Create Traffic Policy wizard, select Edit>Add>Traffic Policy from the
menu, or right-click a policy based services entry in the Policy Based Services panel
and select Add>Traffic Policy from the pop-up menu. The Create Traffic Policy
wizard will appear. Figure 4-5 shows the Create TCP Traffic Policy wizard. The
UDP wizard looks almost identical, and the IP wizard does not have the port
specification fields.
4-10 IP Service Manager User Guide