Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 60

Hide thumbs Also See for BlackDiamond X8 Series:
Table of Contents

Advertisement

Baud rate: 9600
Data bits: 8
Stop bit: 1
Parity: None
Flow control: XON/XOFF
The terminal or PC with terminal-emulation software that you connect to an Extreme Networks switch
must be configured with these settings. This procedure is described in the documentation supplied with
the terminal.
Appropriate cables are available from your local supplier, or you can make your own. To ensure the
electromagnetic compatibility of the unit, use only shielded serial cables. For information about the
DB-9 console plug connector, see
Log In for the First Time
Log in and manually configure the IP settings.
1
Connect a terminal or PC with terminal-emulation software to the management module in the
switch.
2 At the terminal, press Enter one or more times until you see the login prompt.
3 At the login prompt, enter the default user name admin to log on with administrator privileges.
login: admin
The system will ask a series of questions about the default management settings, which allow all
forms of management access for convenience in setting the initial configuration. Administrator
capabilities allow you to access all switch functions.
4 Answer each question based on the level of security needed for the particular management access
type.
Note
For more information about logging in to the switch and configuring switch management
access, see the ExtremeXOS Concepts Guide.
5 At the password prompt, press Enter.
The default user name admin has no password assigned to it.
When you have successfully logged on to the system, the command line prompt displays the
system name (for example, BlackDiamonX8>) in the prompt.
Note
For more information about how to assign a specific system name, see the ExtremeXOS
Concepts Guide.
6 Type configure vlan default ipaddress 123.45.67.8 255.255.255.0 to assign
an IP address and subnetwork mask for VLAN default.
Your changes take effect immediately.
BlackDiamond X8 Series Switches Hardware Installation Manual
Installing BlackDiamond X8 Series Modules
Connector
Pinouts.
60

Advertisement

Table of Contents
loading

Table of Contents