State-Based Softkeys (Bottom Keys Only) - Aastra 55i IP Phone User Manual

State-Based Softkeys
On the 55i bottom softkeys, you can configure a specific state to display when a
softkey is being used.
The following table describes the states available to configure for the softkeys.
State Description
idle The phone is not being used.
connected The current line is in an active call (or the call is on hold).
incoming The phone is ringing.
outgoing The user is dialing a number, or the far-end is ringing.
busy The current line is busy because the line is in use or the line is set as
"Do Not Disturb".
The following table identifies the applicable default states for each softkey type on
the IP phone.
Softkey Type
None
Line
Speeddial
DND
BLF
BLF List
Auto Call
Distribution (ACD)
Directed Call
Pickup (DCP)
Group Call
Pickup (GCP)
XML
56 Model 55i IP Phone User Guide
(Bottom Keys only)
Softkeys
(state-based)
Default States
All states disabled.
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy