Aastra 55i IP Phone User Manual page 100

Park/Pickup Key Configuration
The programmable method of configuration creates park and pickup keys that you
can configure on the 55i phone.
You can set a key as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify a value
• specify which line to use
• specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that you
configured for the Park key displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup key dis-
plays on other phones in the network. You can then press the "Pickup" key,
followed by the applicable value to pickup the call on another phone in your
network.
You can configure a Park and Pickup programmable configuration using the Aastra
Web UI.
Key Configuration Using the Aastra Web UI
On the 55i, you configure a Park and/or Pickup key at Operation->Softkeys and
XML. You enter a key label, and value for a specific line on the phone. The default
state of the Park configuration is "connected". The default state of the Pickup
configuration is "idle, outgoing".
Note: Applicable values depend on the server in your network (Asterisk,
BroadWorks, Sylantro, ININ PBX. See the table
Server Configuration Values"
92 Model 55i IP Phone User Guide
"Park/Pickup Call
on page 91.