Connecting A Digital Audio System; Connecting An Audio System - Toshiba 22AV60U Owner's Manual

Connectinga digital audio system
The TV's DiGiTALAUDIOOUTterminal outputs a Dolby _'*
Di ital rnooL,_
g .......or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby _'Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
TV backpanel
DIGITAL d__
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press M_uon the TV's remote control and open the Audio
menu.
3
Highlight AudioSetupand press @.
4
Audio Settings
In the Optical Output Format field, select either DNby
Digital or PCM,depending on your device (_"'Selecting
the optical audio output format" on page 38).
Reset Done
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
damage speakers or heaoghones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTK
The DIGITAL AUDIO OUT terminal may not output some
digital audio soumes because of copy restrictions.
* Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
• standard audio cables
-_ Analog audio amplifier /'_
To control the audio:
1 Turn on the TV and the stereo amplifier.
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV's
volume control or the amplifier's volume control.
3 Menu item of Speakers can turn to OFF to mute the TV's
built in speakers.
17