Connecting A Digital Audio System; Connecting An Audio System - Toshiba 40SL412U Easy Setup Manual

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT terminal outputs a
® *
Dolby Digital or 2-channel down-mixed
PCM (Pulse-Code Modulation) signal for use with
®
an external Dolby Digital decoder or other external
audio system with optical audio input.
You will need:
Optical audio cable (Use an optical audio cable
•
that has the larger "TosLink" connector and not
the smaller "mini-optical" connector.)
Dolby Digital decoder or
other digital audio system
TV back panel
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press on the TV's remote control and open the
Sound menu.
3
Highlight Audio Setup and press
4
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
( "Selecting the optical audio output format" on
page 39).
Chapter 2: Connecting your TV
Note:
• Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY.
• The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured under license from Dolby
Laboratories. Dolby, and the double-D symbol are
trademarks of Dolby Laboratories.

Connecting an audio system

This connection allows you to use external speaker
with an external analog audio amplifier to adjust the
level.
You will need:
• standard audio cables
.
Analog audio amplifier
TV back panel
LINE IN
L R
(continued)
19