Usingthe Closedcaptionbuttonon The Remotecontrol; Adjusting The Audio; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba 22AV60U Owner's Manual

Usingthe ClosedCaptionbuttonon the
remotecontrol
If you press @ when an analog channel is tuned:
• The CC selector will be active and will display CC 1-4 and
T 1-4 as the options.
• The audio selector will be disabled.
If you press @ when a digital channel is tuned:
• The CC selector will be active and will display the possible
caption options (available languages) for that channel or
service. For example, in addition to English, a channel
might offer closed captions in Spanish and/or French.
• The audio selector will be active and wilt offer different
audio choices for the digital channel (Dotby or AC3, for
example).
Adjusting the audio
Nuting the sound
Press =_E on the remote control to partially reduce (1/2 MUTE)
or turn off (MUTE) the sound. Each time you press _E, the
nmte mode wilt change in the following order:
[---+1/2 Mute _ Mute _ Volume ---+ ==]
If the closed caption mode is set to Offwhen you select
"MUTE" mode, the closed caption feature is automatically
activated if the TV program is Closed Captioned. To nmte
the audio without automatically activating the closed caption
feature, use _-_ to set the volume to 0. See "Using the closed
caption mode" (_' page 36) for more information on closed
caption modes.
Usingthe digital audio selector
You can use the Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under Audio
Setup (_, "Selecting stereo/SAP broadcasts" on page 37).
To use the digital audio selector:
1 Press =_u and open the Audio menu.
2 Highlight Digital Audio Selector and press @.
3
Press A or V to select AudiO, and then press ,_ or _ to
select the desired service.
EXIT
/1 Press O.
Selectingstereo/SAPbroadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
nmsic, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" appears on-screen when RE_LL i s pressed.
The MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen to stereo sound:
1 Press M_uand open the Audio menu.
2
Highlight AudioSetup and press @.
3
In the SiS field, select Stereo.
/1 To save the new settings, highlight Doneand press @.
To reset the settings to the factory defaults, highlight
Reset and press @.
Note:
• You can typically/eave the TVin Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to an alternate language on an ATSC digital
station (if available):
Highlight the Language field in step 3 above, and then press
4 or _ to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on
those TVstations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station_
normal audio will be output. However, occasionally there is
no sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
37