EUROCOM Notebook User Manual page 137

Problem
The Wireless LAN/
Bluetooth/ modules
cannot be detected.
The Wireless LAN/
Bluetooth/ modules
cannot be configured.
The PC Camera
software displays a
black screen when the
EMAMCAP software is
run.
The modules are off. Check the LED indicator
(see "LED Indicators" on page 1 -
appropriate AP-Key button in order to enable the modules (see
The driver(s) for the module(s) have not been installed. Make sure you have installed the
driver for the appropriate module (see the instructions in
appropriate module).
The software is using the incorrect device. If you have both the optional PC Camera and TV
Tuner modules present, make sure you install the TV Tuner driver and application first. After
installing the PC Camera driver you will need to select which device to use with the EMAM-
CAP program. Go to the Devices menu in the EMAMCAP program and select the USB2.0
1.3M PC CAM device. (see "PC Camera & TV Tuner" on page 7 -
Possible Cause - Solution
to see if the modules are on or off
6). If the LED indicator is off, then press the
Problems & Possible Solutions 8 - 11
Troubleshooting
Table 1 - 3, on page 1 - 7
Chapter 7 "Modules" for the
16).
8