Troubleshooting - EUROCOM LCD PC User Manual

Troubleshooting

Problem
Nothing appears on
screen.
You forget the boot
password.
The DVD regional codes
can no longer be
changed.
The sound cannot be
heard or the volume is
very low.
The Wireless LAN/
Bluetooth modules
cannot be detected/
configured.
The screen saver is activated. Press any key or move the mouse to return to your display.
The system is in a power saving mode. Press the power button for less than 4 seconds. If the
computer does not turn on again then it was most likely shut down, or has no power source.
Check the cables, outlets, power strips etc.
If you forget the password, you may have to discharge the battery of the CMOS. Contact your
service representative for help.
The code has been changed the maximum 5 times. See
page 11.
The volume might be set too low. Check the volume control knob, and click the Volume icon
on the taskbar to check the Windows setting (see
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
Wireless LAN (WinXP)" on page 24/"Bluetooth (WinXP)" on page
Possible Cause - Solution
"Changing DVD Regional Codes" on
"Sound Volume Adjustment" on page
Concise User's Guide
13).
"802.11b/g
25).
Troubleshooting - 27