Led Indicators; Power Button - EUROCOM LCD PC User Manual

Concise User's Guide

LED Indicators

The LED indicators on the computer display helpful in-
formation about the current status of the computer.
Table 1 - LED Indicators
Icon Color
Green
Green
Green
Flashing
Orange
System Shutdown Warning
After shutting the computer down, allow time for the
system to shut down properly (i.e. the fan stops turn-
ing) before attempting to turn the system on again.
10 - System Map: Front View
Description
Floppy Disk Drive Activity
Hard Disk Drive Activity
System Power is On
System is in Standby Mode

Power Button

When the computer is on, you can use the power button
as a Standby or Hibernate hot-key button when pressed
for less than 4 seconds. Use Power Options in the "Win-
dows" Control Panel to configure this feature.
Reset Button (Model A - Design II
only)
Press this button to restart your computer. This button is
equivalent to pressing Ctrl + Alt + Del and only avail-
able on Model A - Design II
Forced Off
If the system "hangs", and the Ctrl + Alt + Del key
combination doesn't work, press the power button for
4 seconds to force the system to turn itself off.
Shutdown
Please note that you should always shut your com-
puter down by choosing the Turn Off Computer
command from the Start menu in Windows. This will
help prevent hard disk or system problems.
(Figure 2 on page 8).