EUROCOM LCD PC User Manual page 24

Concise User's Guide
Intel(R) Dual Display Clone
In addition to using a single display device, you can use Intel(R) Dual Display Clone Mode to drive two displays
with the same content. To enable Intel(R) Dual Display Clone Mode:
1. Plug the external display into the external monitor port at the rear of the computer, and power it on.
2. Go to the Intel(R) Extreme Graphics 2 control panel (see "Video Features" on page 16) and select Devices (tab).
3. Click Intel(R) Dual Display Clone (icon) in the Devices (tab).
4. Choose one device to be the Primary/Secondary display.
5. Click Apply > OK to confirm the settings change.
6. Adjust the Color, Screen Area and Refresh Rate (of the Primary device only) by clicking Device Settings (button), and
Apply > OK to confirm.
18 - Video Features