Sony DCR-DVD505 Operating Manual page 126

WarsisS isdisats_s asd msssases/ssstiss@}
Access error.
• An error occurred during readingor
writing the disc.
• "Memory Stick Duo"
_ Reinsert the Memory Stick.
• Reinscrt tile"Memory Stick Duo" a few
times. If even then the indicator flashes,
Ihe "Memory Stick Duo" can be
damaged. Try with another "Memory
Stick Duo."
This is a read-only Memory Stick.
• Insert a writablc "Memory Stick Duo/'
Incompatible type of Memory
Stick.
• A type of "Memory Stick Duo"
incompatible with your camcorder is
inserted (p. 132).
g_ This Memory Stick is not formatted
correctly.
• Check the format, then format tile
"Memory Stick Duo" with your
camcorder if necessary 1p.77, 132).
Cannot record. The Memory Stick is
full.
•Dclctc unnecessary images (p.86).
Cannot record still images on Memory
Stick. (p.132)
_ The Memory Stick is locked.
Check the tab. (p 132)
Cannot playback. Reinsert the
Memory Stick. (p.30)
Cannot record. Reinsert the Memory
Stick. (p.30)
Memory Stick has been removed.
Process canceled.
Memory Stick folders are full.
• You cannot create lkddels exceeding
999MSDCE You cannot create or delete
created folders using your camcorder.
• You will ha'_eto format the "Memory
Stick Duo" (p.77), or delete them using
your computer.
Do not eject the Memory Stick during
writing.
_ Insert a Memory Stick or change
STILL MEDIA to DVD. (p.30, 35, 41)
Cannot record still pictures.
No more still pictures during movie
recording.
• You arc trying to record three or more
still images, the maximum number that
can be recorded at one time, inrecording
with the Dual Rec function (p.45).
No more still pictures during movie
recording
• When using the Dual Rcc fimction,
do
not qiect the "Memory
Stick Duo" from
your camcoNer from after recording a
movie is finished until the still images
are recorded on the "Memory Stick
Duo."
Cannot save still picture.
• VV'hcn using the Dual Rcc fimction, do
not remove the still image recording
media from the camcorder until disc
recording is finished and still image
recording is complete (p.45).
• PictBridge compliantprinter
Check the connected device.
•
Switch off the printer and switch it on
again, then disconnect the USB cable
!supplied) and reconnect it.
126