Installingsoftware and "First Step Guide"
You need to install the software to your
Windows computer before connecting
your camcorder to the computer, The
installation is required only lot the first time.
Contents to be installed and procedures may
difli_r depending oil your OS.
4
Click [Install].
4
/
Confirm
that your camcorder
is not
connected
to the computer,
2
Turn
on the computer,
• Log on as Administrators
h)r installation.
• Close +dl +q)plicmions running on the
computer
belore installing the soflwarc.
3
Place the supplied CD-ROM in the
disc drive of your computer.
Tile installatiolt screen appears.
• Depending on tile operaling system on the
computer, a message appears notil}iing you
that 'Firsl Step Guide". cunnot be installed
automalicgllly wilh the InstallShield
Wiz.rd.
In such a ca_, manually copy "Firsl Step
Guide" to your computer
according to the
inessage_s instrllctions.
5 Select the language for the
application to be installed, then
click [Next],
• If the screcn does not appeal, lMlow the
procedure below.
@ Double-click
[My Con_puter] (If you are
using Windows XR click [Starll,then [My
Computer].)
@ Double-click
[PICTUREPACKAGE]
(Disc drive).*
* Drive names (such as (E:)) may valy
depending on the computer.
6
Click [Next].
==
3
Continued._
101