Step 6: Settingthe Date And Time - Sony DCR-DVD505 Operating Manual

Step 6: Settingthe date and time
Set the date attd time when using this
camcorder for the first time. If you do not set
the date attd tithe, the [CLOCK SET] screen
appears every time you turn on your
camcorder or slide the POWER switch.
• If you do not use your camcorder tbr aboul 3
months, the buill-in rcchargeable baltcry gets
discharged *rodll_e date and time settings may be
cleared tiom lhe memory. In lhat case, charge lhe
rccllargeable batlery and lhen sel file dale and time
again (p. 138).
POWER switch
Skip to step 4 when you sel the clock for the
first lime.
1
Touch _ --+ [SETUP].
2
Select :<_ (TIME/LANGU.) with
I_/I_, then touch I_.
4
Select the desired geographical
area with I_/1_, then touch I_.
L_ Lx
_ST
5 Set [DST] or [SUMMERTIME] to
[ON] with 1_7/1_7, if necessary,
then touch I_.
6
Set [Y] (year) with I_/1_, then
touch Io_.
L_J Lx
ARE_26 GMT SO
r No.York Boao_ q
D_
D_E
• You can sel any year up tothe year 2079.
"7
! Set [M] (month), [D] (day), hour and
minute, then touch Io_].
The clock starts.
For midnight, set it to 12:00 AM.
For midday, set it to12:00 PM.
• Refer 1o page 130 R_rinformation
concerning
"World lime ditl_:rence."
• The recording date and time are not displayed
during recording, but arc automatically recorded
onlo the disc and you can check them during
playback ([DATA CODEI, p.75).
• Instead of [DSTI, [S UMMERTIMEI is displayed
t_)r SOrtie models,
¢D
€/a
3
Select [CLOCKSET]with I_/1_,
then touch I_.
27