Sony DCR-DVD505 Operating Manual page 113

No sound or only a low sound is heard when playing back a disc.
• Set [MULTI-SOUND] to [STEREO] (p.78).
• Turn up the volume (p.43).
• Sound is not output when the LCD screen is closed. Open the LCD screen.
• When you record sound with [MICREF LEVEL] 1p.78) set to [LOW], the recorded sound may
be difficult to hear.
• [SMTH SLW REC] is selected, sounds cannot be recorded.
You cannot play back the disc or a disc cannot be recognized.
• Clean the disc using the cleaning clolb (supplied, p. 131).
• Finalize the disc (p.54).
• A disc recorded in VR mode cmmot be played back on a device that does not support VR mode.
Check the compatibility in the instruction manual of the playback device.
The playback picture is distorted.
• Clean the disc using the cleaning clolb (supplied, p. 131).
"[Tt" is indicated on an image in the DVD menu.
• Loading of the data may ha'_c llulcd when the disc _as finalized. For DV D-RW (VIDEO modc)/
DVD+RW. make the disc capable of additional recording (p.61 ), then remake the DVD menu
by finalizing the disc again (p.57). The DVD menu may be displayed correctly.
Playback freezes for an instant between the scenes.
• The image may freeze fin an instant between scenes depending on the DVD device being used.
This is not a malfunction.
Playback does not move to the previous scene when you press 1_141.
• If playback crosses 2 lilies made aulomalically by' your camcordcr when _ is pressed,
playback may not move to Iheprevious scene. Selecl Ibe desired scene from the menu screen.
Refer to the ins{ruction mantlal of tbe playback device l_)rfurlher information.
Setup items are grayed out.
• You cannot select grayed items in the current situation.
is not displayed.
• You L1ln operate limited operations during Easy HaMycam operation. Cancel Easy Handycam
operation (p.33).
g-
Continued._
113