A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn offthe power, :roddisconnect the AC Adaptor fromthe wall outlet. Then, connect it again.
An unknown picture appears on the screen.
• The camcorder is in [DEMO MODE] (p.76). Touch the LCD screen or insert a disc or"Memory
Stick Duo" to cancel [DEMO MODE].
An unknown indicator appears on the screen.
• They may be warning indicators or messages (p. 123).
The picture remains on the LCD screen.
•
This Ol.'CLII
"_, i f you disconnect the AC
Adaptor
from the wall outlet or remove the
battery
pack
without turning off the power first. This is not a malfimction.
You cannot turn the LCD backlight off.
• During Easy Handycam operation (p.33), you cannot turn the LCD backlight on/off pressing
and holding DISP/BATT INFO.
The buttons do not appear on the touch panel.
•
Touch the LCD
screen
lightly.
• Press DISP/BATT INFO ol7your camcorder (or DISPLAY ol7Ihe Remote Commander) (p.26,
51).
The buttons on the touch panel do not work correctly or do not work at all.
• A_[justthe screen ([CALIBRATION]) (p. 137).
The picture in the viewfinder
is not clear.
• Use the viewfinder lens adjustment lever to adjust the lens (p.25).
The picture in the viewfinder
has disappeared.
• The picture is not displayed in the viewfindcr when Ihe LCD screen is own. Close the LCD
screen (p.25).
Continued
=_
107