Chapter 5: Editing And Selection Features; Editing Features; Paste Relative - Euphonix R-1 Digital Multitrack Operation Manual

Euphonix Version 3 Supplement to the R-1 Operation Manual

Chapter 5: Editing and Selection Features

Clip-based selection and editing along with the waveform display make the R-1's editing
tools easier and more powerful to use. Waveform display makes locating edit points
easier and faster. These enhancements allow a greater range of editing operations on the
R-1 without transferring to a separate editor and can even fix problems that previously re-
quired punch recording.
This chapter discusses all changes and new functionality for selecting and editing
Clips and time on the Track Sheet:
• Cue Track Editing
• Selecting Clips
• Wireframe Selection
• Right-click menus
• The Information drop-down panel in the Multitrack
Refer to page 260 of the R-1 Operation Manual for more information of the editing fea-
tures of the R-1.
5.1

Editing Features

Version 3 allows greater editing interaction between the trackball and keyboard. The
trackball cursor can now select Clips (punch segments) with a single click. It is now
also possible to wireframe select using the trackball and to precisely adjust Clip, selec-
tion, or track parameters in a context-sensitive Information dialog. The time of the
trackball's cursor is shown as a parameter to allow precise selection without changing
the play location. Many edit operations are now accessed from drop-down menus,
such as restoring the original recording parameters to previously edited Clips.
5.1.1

Paste Relative

A pasted Clip can maintain the same offset to the Play head as when the Clip was copied.
This allows spotting a sync point during the copy operation and using it to locate the
paste point with a minimum of keystrokes. Sheet-to-Sheet track copies are also auto-
matically synchronized using this feature without relocating the play head.
Press Wave+Paste on the Remote, or right-click on any Track and choose Paste Relative
from the popup menu.
43