Import To The Multitrack; The Import Wave Files Dialog - Euphonix R-1 Digital Multitrack Operation Manual

Euphonix Version 3 Supplement to the R-1 Operation Manual
3.2.5

Import to the Multitrack

1. Right-click on any Sound Clip on the track where you want to use an imported
sound and choose Import.
The Import Wave Files batch dialog appears. If the selected Clip has never
been exported, the Add Wave File to Import List appears to allow selection
of the WAV file to import. If the WAV file cannot be positively identified as
originating with the sound file of the selected Clip, you can only import that
file into the Directory as described above. If the selected Clip has been previ-
ously exported, the export name will automatically be listed in the Import
Wave Files batch dialog.
2. To include other files in the Import batch command, press the Add Files to Im-
port List button.
The Add Wave File to Import List dialog that appears is a typical Windows
file dialog.
3. Select one item or several using the Ctrl or Shift keys.
4. Click the Open button to confirm the addition of these files to your list.
The dialog closes leaving the Import Wave Files batch dialog open.
Those sounds from previous exports are labeled Overwrite Old File; sounds not from
previous exports will be labeled Create New File.
Figure 3-6 The Import Wave Files dialog
32
File Management