The Locator; The Cue Track; Cue Track Right-Click Menu - Euphonix R-1 Digital Multitrack Operation Manual

Euphonix Version 3 Supplement to the R-1 Operation Manual
This is done because linked channels produce different legs of the same recording since
the track record status, monitoring, and punch points are all linked and identical for
these channels. When editing and importing multichannel sound, the open track sheet
should be configured with channels linked accordingly. This will produce Sheets that
play all desired audio from all channels.
A multichannel file can be pasted into a smaller number of channels. Select the number
of channels to edit without linking them, then paste the multichannel file. Channels are
pasted in the order they occur in the original file. For example, if the multichannel file
has six tracks and the destination has three, the first three tracks from the multichannel
file are pasted. Refer page 204 of the main R-1 Operation Manual for more information.
4.2

The Locator

4.2.1

The Cue Track

The Cue track now supports a right-click menu to adjust various Locator controls in-
cluding Go to Here and Loop to Here. These controls may be easier and/or faster to
access than those on the Remote.
Figure 4-1 Cue Track right-click menu
38
Locator and Track Controls