Using Map; Map Operating Requirements; Installing Map; Running Map And Selecting A 4400N - NEC 4400 - SuperScript Color Laser Printer User Manual

U MAP
SING
The Management Access Program (MAP), runs only under
Windows 95/98 and Windows NT 4.0. You use MAP to list
SuperScript 4400 network printers connected to your
network. Then you select one to go to its Network
Administration Page for network administration options.

MAP Operating Requirements

To use MAP, you must have installed on your PC
• Netscape Navigator or Internet Explorer
• The Microsoft TCP/IP protocol stack, if printer is going
to support TCP/IP.
For IPX Search Functions: The IPX protocol must be
installed and enabled on your PC. Both Microsoft and the
NetWare 32-bit stacks are supported. You must log in to
the Novell Server.
For IP Peer to Peer Printing: Both your workstation
and printer must have an IP address and subnet mask
entered. If communicating across subnets, the default
gateway must also be identified.
For IPX Peer to Peer Printing: Your PC must have the
IPX/SPX compatible protocol installed and enabled.

Installing MAP

MAP is available on the SuperScript 4400 Series CD that comes
with your printer. MAP must be installed from Windows 95/
98 or Windows NT 4.0. It cannot be installed from the
®
MS-DOS command prompt.
a. Insert the SuperScript 4400 Series CD.
b. Use the Administrator installation option to install
the MAP utility.

Running MAP and Selecting a 4400N

a. In Windows 95/98 or Windows NT 4.0, press the
Start button. Select MAP from the program group
you specified during installation.
When MAP starts, a list of all available units on the
network is displayed by unit IP address or serial number.
The unit listing will be divided by TCP/IP units and
IPX/SPX units. See the illustration below.
note:
If a unit is enabled for both IP and IPX, it will
appear in both lists.
b. Click on a unit under IPX/SPX in the list to display
its Network Administration Page. Click on a unit
under TCP/IP to display the printer's Home Page.
The Network Administration Page options are explained
beginning on page 75.
An example using MAP and the Network Administration
Page to configure the printer for NetWare 4.x is shown on
page 85.
Management Access Program 3.20
[Refresh] [Help]
Units supporting TCP/IP
http://131.241.45.61/NEC_991142 NEC SuperScript 4400 Ethernet Card
http://131.241.45.203/NEC_991149 NEC SuperScript 4400 Ethernet Card
http://131.241.45.64/NEC_991151 NEC SuperScript 4400 Ethernet Card
http://131.241.45.83/NEC_991650 Print Server Card
http://131.241.45.191/NEC_991653 Print Server Card
http://131.241.45.189/NEC_991655 NEC SuperScript 4400 Ethernet Card
http://131.241.45.127/NEC_999999 Print Server Card
Units supporting IPX/SPX
NEC 991142 NEC SS 4400
NEC 991149 NEC SS 4400
NEC 991151 NEC SS 4400
NEC 991650 NEC SS 4400
NEC 991653 NEC SS 4400
The MAP lists the 4400N printers on your network.
Select one to display its Network Administration Page.

Using MAP

77