NEC 4400 - SuperScript Color Laser Printer User Manual page 93

Second, Install the Printer Driver
In Windows, use the Add Printer feature to install and
configure a SuperScript 4400 printer driver in each
workstation that will access the network printer.
note:
SuperScript 4400 printer drivers are on the
SuperScript 4400 Series CD that comes with the printer.
Specify that the printer will be attached as a Network Printer,
and set the Port to the printer queue you just created. (The
Windows NT 4.0 driver installs automatically to LPT1:. After
installation, you can manually reset the port to your NetWare
queue.)
Third, use MAP and the Network Administration Page to
Configure the Network Printer
Now you must specify the Print Server Name, Preferred
NDS Context, and Preferred NDS Tree using the Network
Administration Page options. Continue with the instructions
below, to do this.
1. Run MAP.
a. If you have not yet installed MAP, follow the
instructions on page 77.
b. In Windows 95/98 or Windows NT 4.0, click the Start
button. Select MAP from the program group you
specified during installation. When MAP starts, a list
of all available units on the network is displayed by
unit serial number.
2. Select the 4400N to configure.
a. Click on a 4400N in the list to display its Network
Administration Page.
3. NetWare 4.x (NDS) Configuration
a. On the Network Administration Page, click on
Setup NetWare in the Protocols column.
b. In the NetWare Configuration menu that appears,
enter a name in the Print Server Name field, enter a
name in the Preferred NDS Context field, and enter
a name in the Preferred NDS Tree field. (Leave the
Preferred File Server field blank.)
c. Enter the password and click on the Accept Settings
button. (The default password is sysadm.)
4. Turn the printer off and then on again to validate
network settings changes.
5. Confirm Successful Configuration.
a. In the Systems column, click on Reset. After the
Reset, turn the printer off and then on again.
b. Go back to the Network Administration Page, click
the Network Administration button. Then, in the
System column, click on Unit Status.
c. In the dialog box that appears, scroll down to display
the NetWare Status. The Queue Status should be
Attached.
d. If the Queue Status is not shown as Attached, please
verify that the entries for Print Server Name,
Preferred NDS Context, and Print Server Password
match those defined in NWADMIN.
NetWare 4.x 85