Printing A Startup Page - NEC 4400 - SuperScript Color Laser Printer User Manual

P S
RINTING A TARTUP
Follow these steps to connect your printer to AC Power and
print a Startup Page.
1. Make sure the power switch is turned off (button is out).
2. Connect the Power Cord to the rear of the printer.
3. Plug the other end of the Power Cord into a properly
grounded outlet.
WARNING! This printer is intended to be electrically
grounded. It comes with a three-wire grounding plug. This
plug will only fit a grounded AC outlet or power strip. This
is a safety feature. If you are unable to insert the plug into
the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the
purpose of the grounding plug by removing the third pin!
4. Turn on the printer power.
A
20 SuperScript 4400 Series — User's Guide
P
AGE
B
5. Indicator lights cycle and the following messages appear
on the Operator Panel display in sequence.
Self Test
SuperScript 4400 booting...
INITIALIZING
WARMING UP
PRINTING
6. The printer issues the Startup Page and the following
message appears on the Operator Panel display.
READY
C
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Previous Next Select