Network Administration Page; Going To The Network Administration Page - NEC 4400 - SuperScript Color Laser Printer User Manual

N A
ETWORK DMINISTRATION
Each 4400N printer has a built-in web page that allows you to
perform network administration tasks.

Going to the Network Administration Page

You must assign an IP address to your printer. Then you can
use a web browser, such as Navigator or Internet Explorer, to
access the Network Administration Page.
note:
See page 73 for instructions on assigning the
printer IP address. The printer IP address then appears on
the Network Settings page under TCP/IP Network
Information/Protocol Address.
To access the Network Administration Page, open your
browser by double-clicking on its icon.
1. Go to the URL Configuration Page, the URL is
http://<IP address>/configure.html.
2. Click on the Network Administration link. This displays
the Network Administration Page.
The Network Administration Page has the following
features.
System Functions
Reset: Click here to reset the NIC and allow new
settings to take effect. The NIC's connection with the
network is fully reinitialized, but its connection with the
printer controller is not. To reset the connection with the
printer controller, turn the printer off and on.
Factory Defaults: Click here to restore factory default
values on all NIC parameters. You should restore factory
defaults if you move the 4400N to a new network or if the
NIC was set up improperly the first time. Remember that
this option clears all settings you have defined for the
NIC. You must turn the printer off and on again for the
factory default settings to take effect.
P
AGE
The Network Administration Page

Network Administration Page

75