Replacing The Belt Cartridge - NEC 4400 - SuperScript Color Laser Printer User Manual

R
EPLACING THE
Part Number 20-205
1. Turn off the printer (A).
2. Open the Front and Top Covers (B).
3. Flip up the Lock Levers to release the Belt Cartridge (C).
4. Pull the old Belt Cartridge straight up and discard it (D).
5. Remove the black wrapper from the new Belt Cartridge
and pull out the two tension release pins as shown (E).
WARNING! Do not touch the green material on the Belt
Cartridge. It is easily scratched.
6. With the flat side of the Belt Cartridge facing the front,
insert it straight into the guide slots in the lock levers.
The white gear on the cartridge goes to the right.
A B
E
B C
ELT ARTRIDGE
C
F
Do not use force (F).
7. Flip down the Lock Levers (G).
8. Close the Front and Top Covers.
9. Reset the Operator Panel to make sure the consumables
usage information is current (H). Follow these steps.
a. Press Online.
OFFLINE
b. Press Menu.
CONTROL
c. Press Next until
USAGE STATUS
display, and then press Select.
d. Press Next until
BELT REPLACE?
display, and then press Select.
e. When the panel displays
f. Press Menu. Press Online.
G
appears on the display.
appears on the display.
appears on the
appears on the
, press Select.
CONFIRM
D
H
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Select
Previous Next

Replacing the Belt Cartridge

97