Printing A Network Configuration Page; What Next - NEC SuperScript 1800 Network User's Manual

12. If print jobs will be received from Macintosh clients, click
the AppleTalk tab to bring it to the front.
Note:
Since Macintosh computers send their print jobs
in the PostScript language, the SuperScript 1800 must be
upgraded with the PostScript Level 2 Upgrade Kit (Order
No. 1802). For more information, see Chapter 8, "Printer
Options, " of the SuperScript 1800 User's Guide. If calling
from North America, you can dial 1-800-632-4650.
• Select the AppleTalk Enabled check box.
• In the AppleTalk Printer Name text box, type in a
name for the printer. Macintosh users will see this
name in their Chooser window.
• From the Current Zone drop-down list, select which
AppleTalk zone the printer is located in.
13. Click OK to save the configuration.
14. From the Printers menu, select Exit to close NPM.
15. If BOOTP or RARP was selected as the IP address
assignment method in an earlier step, restart the printer.
16 SuperScript 1800 — Network User's Guide
P N
RINTING A ETWORK
C
ONFIGURATION
To verify the NIC configuration, print a network
configuration page then inspect the values shown by the
page for accuracy.
Note:
The network configuration information is also
available from the SuperScript 1800 Web Pages. To view
the pages, use any popular web browser to navigate to
the printer's IP address. Netscape Navigator 4.x and
higher, Microsoft Internet Explorer 4.x and higher, or any
equivalent browser can be used.
To print a network configuration page:
1. From the printer Operator Panel, press the GO button
until appears in the Operator Panel Display.
OFFLINE
2. Press Menu until
NETWORK MENU
3. Press Item until
PRINT NET CFG
4. Press Select to print the page.
W N
HAT EXT
After the NIC has been configured, continue at Chapter 4,
"Peer-to-Peer Topology," or Chapter 5, "Printer Server
Topology," depending on what type of topology you want to
create.
P
AGE
appears.
appears.