Usb Interface Connection - Elo TouchSystems 1528L User Manual

USB Interface Connection

Your touchmonitor comes with one USB cable. (For use with Windows 2000, ME, and
XP systems only.)
To set up the monitor, please refer to the following figures and procedures:
Remove the Cable Cover
The cables are connected at the back of the monitor.
C
AUTION: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor
are turned off.
To remove the cable cover, place your thumbs at the top corners of the cable cover
where the indents are (above the arrows). Gently press and pull the cover toward
yourself.
OTE: Before connecting the cables to the touchmonitor, route all the cables that you
N
will be using through the hole in the base as shown in the picture above. Only use one
of the following: Serial or USB touch cable and D-Sub 15 video cable or DVI video
cable.
User Manual: 1528L
SW200095 Rev A, Page 15 of 39