Interface Connection - Elo TouchSystems 3239L User Manual

Interface Connection

Connector Panel on Rear side of Monitor
Power Cable Serial Cable (not
included with 3239L-
Axxx models)
To connect your touchmonitor to your computer:
1
other end to the power outlet.
2
panel of the monitor. Note: Do not use both. Connect the other end to
your computer.
3
of the monitor. Tighten by turning the two thumb screws clockwise to
ensure proper grounding. Connect the other end to your computer.
4
5
Power
OSD box
Button
connector
Connect the power cable to the rear panel of the monitor and the
Connect either the USB cable OR the serial cable to the rear
Connect the video cable and/or the DVI-D cable to the rear panel
Press the power button on the rear panel to turn the monitor on.
Connect the OSD control box to the monitor.
USB cable DVI-D cable (not
included with
3239L-xxEx models)
Elo TouchSystems 3239L User Guide 9
Video Cable