Troubleshooting - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual

Troubleshooting

If you encounter problems with the QuadCharger device, refer to chart below for possible solutions. If
problems persist, please contact
Problem
The Status LED does not come on
when I insert a battery pack into a
slot.
The Status LED lights red during
charging.
The Status LED lights red and stays
on without a battery in the charging
slot.
11 - 6
Downloaded from www.Manualslib.com
Technical Assistance
Issue
Check the power connections on the QuadCharger device; make
sure the POWER switch is ON and the battery pack is properly
seated.
Try to charge the battery in one of the other charging slots. If the
red Status LED comes on again, then the problem is associated
with the battery pack. If the red status stays with the charging slot,
the problem is associated with the charging circuitry.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Honeywell
page 14-1) to request an RMA.
manuals search engine
(see page 14-2).
Product Service and Repair
Rev A
5/23/2008
(see
Dolphin® 7600 Mobile Computer
User's Guide