Receiving Data - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual
With windows mobile 6.0
Hide thumbs
Also See for 7600BG-122-B4EE - Hand Held Products Dolphin 7600:
- Quick start manual (13 pages)
Table of Contents
Advertisement
5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected
file. The selected device reads "Sending."
6. When the file transfer is complete, the selected device reads "Done."
Receiving Data
The Beam Setting must be set to receive for the terminal to receive data from other infrared devices.
1. Verify that beam settings are set to receive. Tap Start > Settings > Connections tab > Beam. The
Beam Settings window should appear as follows:
2. Align the IrDA ports.
3. Have the owner of the other device send the information to you.
4. Your terminal automatically begins receiving it.
5. A popup message appears asking if you want to receive the incoming file.
6. Tap Yes to receive the file.
Dolphin® 7600 Mobile Computer
User's Guide
Downloaded from
www.Manualslib.com
manuals search engine
Rev A
5/23/2008
7 - 3
Advertisement
Table of Contents
